" Shin- Nippon Kiki " 5-Axis Machining Center CMV 50/5 ( 2002 )
Working Size: 500x500mm
BT-40, ATC-50, F-15i-MB
สินค้าใหม่ NEW ARRIVAL 新規入荷
สินค้าใหม่ คือ เครื่องจักรหรืออุปกรณ์ต่างๆของบริษัทฯซึ่งอาจอยู่ในขั้นตอนรอการนำเข้ามาหรืออาจเข้ามาเรียบร้อยแล้ว
-
-
" TOYOTA " 2.5ton Fork Lift 4FD25 *** Offloading on 6 Mar. 2019 ***3月6日（水）荷下ろし作業をします。
-
“ IKEGAI “ NC LatheModel: TC-15 (1991) FANUC 15TChuck 8 InchMax. Swing: φ 400mmSpindle hole diameter: φ 62mmStandard machining diameter: φ 180mmStroke: X 230, Z 330mmSpindle speed:...
-
" MAKINO " Machining Center FNC-106A-20 (1992) Table Size: 1400x600mm Stroke: X1050, Y600, Z560mm FT-50, ATC-20, 10-3,500rpm FANUC-16MA
-
" MAKINO " MACHINING CENTERModel: MSA 40-40 (1981)Fanuc 0M, Full Gard CoverTB: 800x450mm, Stroke: X 600, Y 400, Z 400mmBT-40, ATC-30, 10,000rpm
-
“ NAGAO “ 100 Ton Press (1985) (3.)Type: NCP-100With Die CushionStroke length: 180mmStroke per minute: 45spmDie height: 450mmAdjustment of slide: 80mmBed area: 110x680mmShank hole ...
-
" MITSUBISHI " Wire CutModel: FX10 (1998)Table size: 630x530mmMax. workpiece dimension: 800x575x215mmMax. workpiece mass: 500kgMovement amount: X 350, Y 250, Z 220mmWire dimeter: 0...
-
" MORI SEIKI " NC Machining CenterModel: MV-Junior (1988) FANUC 10M(Red Motor)Table size: 900x450mmStroke: X 560, Y 410, Z 460mmTable top, spindle end face: 160-610mmSpindle speed:...
-
“ MORI SEIKI “ CNC LATHE MACHINEModel: AL-20 FANUC 0TChuck 6” with Tail-StockSwing: 480mmSwing on the carriage: 310mmDistance between centers: 550mmMax. processing diameter: 250mmS...
-
“ ITO “ HIGHT SPEED CUTTING MACHINEModel: JUPEE 400
-
“ WASHINO “ NC LATHEModel: LJ-5B, F-0TStroke: X 150, Z 520mmChuck: 8” with Tail-StockWith Accessories
-
“ BLUE LINE “ LATHE MACHINEModel: BL-510S-850 (1988)Swing over bed: 510mmDistance between center: 850mmSpindle thorugh hole: 52mmSpeed: 42~1500rpm, 50~1800rpmBed wide: 400mmBed len...
-
“ MURATA “ NC LATHEModel: MW12G (1995) FANUC 16-TTMax. swing: 295mmMovement amount: X 130, Z 145mmSpindle speed: 45~4500rpmDistance between centers: 340mmChuck size: 8”
-
" O-M " TURNING MACHINEModel: VTO-12(1970)Table size: 1200mm*** Coming soon ****** Sold out ***
-
“ FANUC” TAPE DRILL MateModel: T FANUC 0MTable: 650x380mmAxis: X 500, Y 380, Z 330mmMax. loading capacity: 200kgSpindle speed: 60~6000rpmBT30, ATC: 10*** Coming on 27 Jun. ***
-
“ MORI SEIKI “ LATHEModel: MR-1500Chuck size: 12”Swing over bed: 520mmCenter: 1500mmSpindle through hole: φ52Spindle speed: 28~1350rpm
-
“ OKUMA “ NC LatheModel: LS30-N (1990)Chuck size: 8”Swing on the bed : 580mmMax. distance between centers: 1250mmSpindle hole diameter: 77mm*** Sold out ***
-
“ TAKAMATSU “ NC LATHEModel: X-10i (2001)Machining diameter: φ60mmMachining length: 50mmCollet Chuck TypeMaximum swing: 320mmMaximum processing diameter: φ180mmlength: 190mmThrough...
-
“ MORI SEIKI “ NC LatheModel: SL-3A (1984) FANUC 6TChuck10” With Tail-StockSwing over bed: 560mmMax. turning diameter: 235mmMax. turning length: 550mmAxis travel: X 235mm, Z 550mmS...
